ETP / STP
Effluent Treatment Chemicals / Sewage Treatment Chemicals
AHCL has been established to be far more effective, economical and eco-friendly than traditionally used coagulants such as alum, ferric sulphate, ferrous sulphate, ferric chloride etc.
WASTE WATER TREATMENT / SEWAGE TREATMENT
▪ Coagulates very effectively in low as well as high turbidity water.
▪ Reduced Sedimentation time.
▪ Effective in wide pH range.
▪ Rapid & better Floc formation as compared to Alum.
▪ Significant sludge reduction.
▪ Decolorisation & Decontamination of dyes in Textile Industry.
▪ COD/BOD reduction
AHCL has a greater speed of floc formation than alum so it would be possible to shorten the slow agitating (for retention time). The feeding rate of doses should be changed according to the quality of raw water and it is necessary to determine an optimum feeding rate beforehand by means of a Jar Test.
BIOMASS :
Description : Consortium of effective strains of special bacterial populations with their enzyme derivatives which are very efficient to build potential biomass to perform the reduction of pollutants toxicity, contaminants, nutrients & odour via bioremediation process during waste water treatment @ ETP/CETP/WTP
The bacterial count will be around 4 billion
Biomass can remove pollutants (heavy metals, dyes, or further contaminants such as phenol, sulfate, nitrogen, phosphate, and so on) from wastewater and at the same time, contributes to minimizing, recovering, and reusing waste